On Mon, October 2, 2017 2:52 pm, Marv Shelton wrote:
> What is a good source for the .03125” shim stock needed to make a 2” OD
> mast centered in a T2X?
>
> Marv wa2bfw
Probably next to impossible to find .03125 shim stock, as I've never seen
shim stock down in the .00001 range
Most likely you will have to use .030 shim stock, which is everywhere, and
deal with being off a bit more that a thousandth of an inch, or less than
1/2 the thickness of an average human hair
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|