Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 178, Issue 44

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 178, Issue 44
From: bear <bear@bearlabs.com>
Date: Sat, 14 Oct 2017 07:36:04 -0400
List-post: <mailto:towertalk@contesting.com>
Being the OP, asking for advice and expertise is what I have tried so far...

I am unaware of any attachments for Bobcats or anything else that will break up shale
in the vertical direction. Would be interested in what they/it might be??

                    _-_-WBear2GCR

On 10/13/2017 11:46 PM, towertalk-request@contesting.com wrote:
Date: Fri, 13 Oct 2017 20:43:21 -0400
From:<john@kk9a.com>
To:<towertalk@contesting.com>
Subject: Re: [TowerTalk] Tower base over ROCK (shale) experience??
Message-ID: <006101d34485$6ff59160$4fe0b420$@com>
Content-Type: text/plain;       charset="us-ascii"

It is probably less money just to jackhammer the hole(s) to the factory
specifications.  My house in Aruba had very hard rock/coral ground and the
holes were put in by hand by a local using this method. There are also
attachments for a Bobcat that will break up shale.  What has the original
poster tried so far?

John KK9A

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>