Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: Tower Grounds

To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Tower Grounds
From: Clay Autery <KY5G@montac.com>
Date: Tue, 17 Oct 2017 09:53:22 -0500
List-post: <mailto:towertalk@contesting.com>
A good question, Jim...  I suppose the though is that the stainless steel through bolts that bolts the powdercoated steal clevis to the foundation rod and the aluminum tower legs, are a) not copper/aluminum and b) may not have the best of electrical interfaces with the tower leg.  But since you mention it, I will consider doing some testing to see what the actual measurements are...  Not sure I want any arcing between the bolts and aluminum through holes in my base section though...  I'd prefer no arcing at all if possible.  But I get your point.  Those bolts are very attractive...  and the steel threaded rods protruding 6 foot into the concrete foundation also look mighty attractive for additional bonding points assuming they were properly bonded to the rebar cage and the rebar cage were properly welded together...  Things to think about.  Would be much easier to construct a brazed lug end from the strap end than to make it conform to a round tower leg, etc...

Feedline grounding to the tower is a whole 'nuther animal...  I won't pollute this thread by drifting to that.  <grin>

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 10/17/2017 9:31 AM, jimlux wrote:
Why not just a lug on one of the bolts? Good clamping force, good electrical connection, etc.  If you've already bolted the base to the rods, is there enough to put a lug and a second nut on top?

This brings up an interesting point, why is everybody talking about making "clamps" of some sort to clamp onto a structure which has bolted joints?  I can see needing a clamp when you're grounding a long length of hardline that you don't want to break for a connector.  And I've seen clamps on things like chain link fence posts (typically so that the gate is bonded to the rest of the fence - the fence posts are set in concrete in the soil, so they *are* a grounding electrode)

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>