I'm starting construction of my wire 4 square for 80 meters.
I know the bigger the diameter is (like having Rohn 25 tower for the radiator)
the better the bandwidth.
I'm using #12 insulated wire, but in an effort to enhance bandwidth I'm
planning using two wires joined at the top and at the feedpoint for each
element. To space them I'm using some old KLM diamond shaped spacers every
five feet or so to keep the two wires approximately 5 or 6 inches from each
other...running the wires parallel to each other.
Any thoughts as to how helpful this will be in increasing bandwidth? I have
about 45 of these spacers and they're just gathering dust, and they are
lightweight, UV resistant and free. Also, any thoughts as to how this might
affect the impedance etc.?
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|