Pete,
Being a Belt and suspenders Type... I always have used SS flat washers and
spring washers to assemble the element to boom bracket
U bolts. Have installed a number of F-12 antennas over the years and have
removed Them, Never had a failure in that AREA . The boom to mast plates is
another story.
Wayne W3EA
________________________________
From: TowerTalk <[email protected]> on behalf of N4ZR
<[email protected]>
Sent: Wednesday, February 21, 2018 9:57 PM
To: TowerTalk
Subject: [TowerTalk] Good Fastener Practice
I am in the process of reassembling an old F12 C3E, and noticed that
there were no washers with it. Somewhere I think I recall reading that
when you use split lock washers, for example with U-bolts for attaching
elements to flat aluminum brackets, you should also use flat washers
between the split lock and the bracket. True or false?
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|