I have some ANDREW 1/2" hardline hangers here if anyone is interested. They
look to be all COPPER, threaded stud type. These are new, never used. If
anyone wants a part number form them, I'll dig one out for you and/or take
some pics. - Mike
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Saturday, March 31, 2018 1:23 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Grip Lock Ties
W7ZR should post showing what he is referring to. Quality cable ties like
Panduit work well for me plus I also use some Andrew hangers especailly with
larger Heliax like Grant described. The hangers do a great job of clamping
the cable and are an excellent suggestion.
John KK9A
Grant Saviers wrote:
Not sure what these are but the commercial tower coax holders are
inexpensive and good. For tall towers especially to hold the coax weight in
multiple places, keep it from moving around, and not compress it.
tessco.com query "snap in hangers" or "commscope snapstak" both single
and multiple grip boots are available for many cable sizes.
Grant KZ1W
On 3/31/2018 8:28 AM, Richard Zalewski wrote:
> Curious if anyone has any experience of using the rubber liner grip
> lock ties on their tower or antennas.
>
> Richard
> *W7ZR* ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF,
> W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ,
> XE2DV
>
>
> *Be joyful in hope, patient in affliction, faithful in prayer*
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|