Could be broken springs(I believe there are a total of 4) , stuck brake
wedge, broken brake wedge, or a broken brake pin. I feel that they are
pretty easy to service and have found that parts are readily available from
several sources.
Hope this info is helpful. Good luck.
73
Matt
KM5VI
-----Original Message-----
From: TowerTalk [mailto:[email protected]] On Behalf Of N4IJ
Sent: Wednesday, April 25, 2018 9:00 PM
To: towertalk <[email protected]>
Subject: [TowerTalk] Ham III rotor brake failure
Getting ready to take down my beam and rotor. The brake does not work. I
hear it click when it is energized on the tower. Would that mean a spring
might be broken ? Rotates fine - wind blows it whatever way it wants to.
Doug N4IJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
---
This email has been checked for viruses by AVG.
http://www.avg.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|