Towertalk
[Top] [All Lists]

Re: [TowerTalk] Recommendation for Fiberglass telescoping pole

To: jimlux <jimlux@earthlink.net>
Subject: Re: [TowerTalk] Recommendation for Fiberglass telescoping pole
From: Mickey Baker <fishflorida@gmail.com>
Date: Wed, 27 Jun 2018 11:00:45 -0400
List-post: <mailto:towertalk@contesting.com>
Agree to MGS! I have a 40' heavy duty that I've mistreated for years...

Mickey Baker, N4MB
Palm Beach Gardens
*“Tell me, and I will listen. Show me, and I will understand. Involve me,
and I will learn.” *Teton Lakota, American Indian Saying.


On Wed, Jun 27, 2018 at 8:29 AM jimlux <jimlux@earthlink.net> wrote:

> On 6/27/18 4:54 AM, N4ZR wrote:
> > I need a ~25-foot telescoping fiberglass pole for a K9AY loop.  A lot of
> > the poles advertised on the internet seem to be quite fragile,
> > particularly in the top section.  Any recommendations for something
> better?
> >
>
> FOr portable use? Or semi-permanent installation.  Painter's poles are
> are available in a variety of lengths, and some styles can be stacked.
>
> There's a variety of poles for holding cameras up high.
>
> Maxgain systems has a bunch of stuff
> https://mgs4u.com/product-category/fiberglass/push-up-masts/
>
> The Spiderbeam/DK4SQ type 40 foot poles are pretty skinny at the top,
> but you don't have to use all the sections.
>
> The ever popular crappie/panfish pole is also an inexpensive
> possibility, although they tend to be shorter than 25 ft. but maybe one
> of those on top of a 10ft fiberglass tube or painter's pole might work?
>
> Is guying acceptable (two of the loop wires serve as guys, after all)..
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>