[TowerTalk] 39 +j0 ohms?

["Jamie WW3S" <ww3s@zoominternet.net>]

trying to understand a 40m vertical, my Rigexpert analyzer has Z, X, R and 
C.......when I measure the vertical at 7.125 (target freq) the SWR is 1.3:1, 
but the Z is 50 ohms, I’m told the impedance needs to be 39+j) ohms? How can I 
read that with my rigexpert.....I can get around 39 ohms at 7.400.....is my 
vertical too long, or too short? 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk