Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guy anchor points

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Guy anchor points
From: "Bill Parry" <bparry@rgv.rr.com>
Date: Wed, 5 Dec 2018 08:54:23 -0600
List-post: <mailto:towertalk@contesting.com>
Actually you should read the manual that they put out and they will give you
the proper guy points and anchor points for various types of towers.  It is
not 100 feet necessarily.  

For example.  A Rohn 55 tower 100 feet tall should be guyed (1/4" inch EHS)
(top guy) at 95 feet and 80 feet from the base. The other two guys should be
guyed (3/16" EHS) and guyed at 63' and 33'.

I think this info is on the internet too.

Bill W5VX

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of W1JCW John
Sent: Wednesday, December 5, 2018 8:22 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Guy anchor points

Guys -

What is the normal measurement for guy anchor post distance from the tower
base ? 

I'm putting up three towers, Rohn 45, 35, 25 100' at least. 

Read it was 80' from the base. 

Thanks!


73-
W1JCW
John



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>