Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 193, Issue 30

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 193, Issue 30
From: "Paul F. Merrill" <marinesvcs@gmail.com>
Date: Fri, 25 Jan 2019 09:26:58 -0800
List-post: <mailto:towertalk@contesting.com>
I’d talk to an engineer, tower installer, or K0XG before modifying
anything. You could end up with a large pile of steel and aluminum in your
yard. Or, you know, kill someone.

On Fri, Jan 25, 2019 at 09:00 <towertalk-request@contesting.com> wrote:

> Send TowerTalk mailing list submissions to
>         towertalk@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.contesting.com/mailman/listinfo/towertalk
> or, via email, send a message with subject or body 'help' to
>         towertalk-request@contesting.com
>
> You can reach the person managing the list at
>         towertalk-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TowerTalk digest..."
>
>
> Today's Topics:
>
>    1. K0XG rotating tower bolt issue... (StellarCAT)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 25 Jan 2019 09:03:13 -0500
> From: "StellarCAT" <rxdesign@ssvecnet.com>
> To: "tower" <towertalk@contesting.com>
> Subject: [TowerTalk] K0XG rotating tower bolt issue...
> Message-ID: <076D060926BE424A955A3760F1879778@RXDesignDell>
> Content-Type: text/plain;       charset="utf-8"
>
> Anyone else have issues with the bolts that hold the tower baseplate to
> the main gear? I went to grade 8 bolts here as to me this is not a good
> idea to have those VERY long bolts (7?) holding these two things together ?
> and they?re only 1/2? diameter! One of mine is obviously BENT! I don?t know
> how I could enlarge the holes now that it is together ? I?d MUCH prefer
> these were 3/4? or at least 5/8? bolts. I?ve not had heavy winds here since
> it went up in October of ?16... maybe 60 Mph tops. I?m also considering
> going with a stainless tube ? 1/2? ID and maybe 3/16? walls, as a sleeve
> around the bolts ? but it would need to be tight fitting to make any
> difference, both on the ID as well as the length (height). Another down
> side of doing this is that the grade 8 bolts are zinc chromate ? they?re
> pristine now ? but put them in a tube, what might end up being a sealed
> system if properly done (tight enough) might trap enough moisture to
> corrode them (much?) faster...
>
> Gary
> K9RX
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> ------------------------------
>
> End of TowerTalk Digest, Vol 193, Issue 30
> ******************************************
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>