| To: | <[email protected]> |
|---|---|
| Subject: | Re: [TowerTalk] 40m Beam: Problem - Attenuation and Static |
| From: | "Edward Sawyer" <[email protected]> |
| Date: | Mon, 18 Mar 2019 08:18:02 -0400 |
| List-post: | <mailto:[email protected]> |
I have had this problem as well. Its usually a bad braid to connector - through oxidation or temp cycling over time. Hanging on by a thread and the RF affects the connection. Never shows bad on transmit but affects the receiver. You have to drop in some jumpers to isolate it and when you get down to a few connections, just replace them by cutting back the coax and starting fresh. Ed N1UR _______________________________________________ _______________________________________________ TowerTalk mailing list [email protected] http://lists.contesting.com/mailman/listinfo/towertalk |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TowerTalk] 40m Beam: Problem - Attenuation and Static, Jim |
|---|---|
| Next by Date: | Re: [TowerTalk] 40m Beam: Problem - Attenuation and Static, Herbert Schoenbohm |
| Previous by Thread: | Re: [TowerTalk] 40m Beam: Problem - Attenuation and Static, john |
| Next by Thread: | Re: [TowerTalk] 40m Beam: Problem - Attenuation and Static, Steve London |
| Indexes: | [Date] [Thread] [Top] [All Lists] |