Yes, this is a top quality product, but 1) because nearly all of my
operation is below 50.5 MHz, nearly of my antennas and antenna
switching shack is wired with UHF connectors; and 2) the shortest jumper
I could make use of is about 3 ft, and most are a few feet longer. :) A
year or so ago, I rewired my antenna switching with RG400 after settling
on that cable for chokes.
73, Jim K9YC
On 8/5/2019 9:30 AM, Gedas wrote:
These are ideal for connecting between rig to PA or PA to watt-meter,
PA to coax switches, etc, etc.
These are NOS, 12" jumpers with male-N connectors with RG-214 cable !
Connectors are excellent Suhner and the cables are pristine. RG-214 is
similar to RG-213 except it's the true mil-spec version of it which
uses double-braided shield and stranded center conductors using
_silver_ plated copper. Price lowered to $4.25/ea.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|