Towertalk
[Top] [All Lists]

Re: [TowerTalk] What coax is this?

To: Paul Christensen <w9ac@arrl.net>, towertalk@contesting.com
Subject: Re: [TowerTalk] What coax is this?
From: N4ZR <n4zr@comcast.net>
Date: Wed, 7 Aug 2019 10:19:11 -0400
List-post: <mailto:towertalk@contesting.com>
Yup, you and K1XX agree on this - thanks!

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 8/7/2019 9:26 AM, Paul Christensen wrote:
Pete,

When faced with the problem of getting enough turns through a core, I often use 
RG303 (equiv. Belden #84303).  It's O.D. is 0.17-inch and its materials 
composition is in the same class as RG142.  RG303 is used in several Alpha 
amplifier models.  You'll also see it used in several models from Balun Design.

Paul, W9AC


-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of N4ZR
Sent: Wednesday, August 7, 2019 8:47 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] What coax is this?

John and others - I recently bought 10 feet of what is sold as surplus RG-400.  
At least it has silver-plated shield and center conductors, though no printed 
markings.  My plan was to wind a common mode choke for my 160-meter Inverted L. 
I was using a #31 big snap-on, and found it impossible, because of the 
stiffness of the coax, to get more than about
8 turns on the core, and they wouldn't lie down at all.  The jumper I have is 
extremely flexible, and would be a cinch for the job.

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 8/6/2019 8:50 AM, john@kk9a.com wrote:
Why do you want this?  RG-400 is available surplus for $<2 ft,
Amphenol connectors fit it perfectly and it is excellent for
connecting equipment in the shack.  I have used Teflon coax outdoors
too with no issues.  If you hate soldering you can buy RG-400 /
Amphenol 83-1SP assemblies at DX Engineering.

John KK9A

N4ZR wrote:

Maybe 8-10 years ago at Dayton I bought a 3-foot jumper of coaxial
cable with PL-259s (and reducers) on both ends.  It looks like RG-400,
about the same diameter and with the clear jacket, but is much more
flexible, and the braid is not silver-plated.  Anyone know what this
is, and where I can get more of it?

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>