Towertalk
[Top] [All Lists]

Re: [TowerTalk] US Tower Tubular Tower

Subject: Re: [TowerTalk] US Tower Tubular Tower
From: Raymond Benny <rayn6vr@gmail.com>
Date: Sat, 31 Aug 2019 11:53:27 -0700
List-post: <mailto:towertalk@contesting.com>
I've had a MA770 for 10 years and no problems. I keep it at about 55ft for
a feeling of additional safety.

I have no bang or other noises from it. Be sure the limit switches always
work. Bearings are Fafnir KP8, not KP8A. They do up occasionally on eBay.
At one time I was able to buy them from US Towers.

Ray,
N6VR

On Fri, Aug 30, 2019, 8:04 PM Richard (Rick) Karlquist <
richard@karlquist.com> wrote:

>
>
> On 8/30/2019 7:26 PM, FRED MATOS via TowerTalk wrote:
> > I am considering buying a used US Tower tubular tower with tilt over
> feature.
> >
> > I would appreciate tips on what to look for in my evaluation.
>
> The state of the pulleys is hard to assess and UST
> isn't very helpful about replacing them.  Having said
> that, I had one of these for over 30 years and it was
> still working when I sold it.  AFAIK, the pulleys were
> still OK.  But they can fail.
>
> The other issue is that the antenna will swing back and
> forth in the wind and make banging sounds on the
> tubes.  This may or may not be OK with neighbors.
>
> Getting the rotor set up seems to be obvious, but it's
> not.  Nothing is documented about this.
>
> Rick N6RK
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>