[Top] [All Lists]

Re: [TowerTalk] Force12 rebuild

Subject: Re: [TowerTalk] Force12 rebuild
From: N5KM - Kris <>
Date: Sun, 22 Dec 2019 16:47:06 -0600
List-post: <>
Hi Howie,

Good info in your write-up. Thanks for the alumoweld source.
Bill, W2AY, also provided that link. I had checked the various wire sources
but didn't think of MFJ/Hy-Gain.

Re: seized standoffs. I had checked with Tom N6BT but he said they weren't
available anymore. He suggested hex standoffs. I found some of the
appropriate size
from McMasters. I'll be using liberal amounts of anti-seize.

BTW, this is being rebuilt as a 30m yagi to be side-mounted at 55 ft.

Kris N5KM

------------------ -------------------------------------------
Date: Sat, 21 Dec 2019 14:59:37 -0500
From: Howard Hoyt <>
Subject: Re: [TowerTalk] Force12 rebuild
Message-ID: <>
Content-Type: text/plain; charset=utf-8; format=flowed

Hi Kris,

I went through this a few years back and published a blog on the process
including links to materials:

Good luck and have fun!? I did...
Howie / WA4PSC

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>