My experience is that the ring is likely installed incorrectly. I would try
taking apart and re-assembling.
73, Keith NM5G
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Michael Zilavy
via TowerTalk
Sent: Sunday, April 5, 2020 12:10 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Tic Ringrotor Question
Good Afternoon,
Anyone know the secret to getting a Tic Ringrotor not to bind or skip?
Working on Model CX-16/22 for weeks and can't get the darn thing to rotate more
than 40 degree's before it binds or the ring will not mesh in the motor?Always'
too tight or too much play and the the gear wont mesh with the ring.
Frustrating.
Thanks
WA3CMike
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|