Re: [TowerTalk] How best to cut 1/4 inch ss cable?

["J. Hunt via TowerTalk" <towertalk@contesting.com>]

 Electrical tape either side of cut area and a grinder.
About 5 seconds and your done.

Kindly use Safety glasses / goggles.

Thanks,
James     On Saturday, June 27, 2020, 02:20:40 PM CDT, Wayne Kline 
<w3ea@hotmail.com> wrote:  
 
 Phil,

  I do the electrical tape and use either in the field a 36 in long BOLT cutter 
 or in the shop a high speed Wizzer  ( cut off tool )

Wayne ,W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Phil<mailto:pmills7@comcast.net>
Sent: Saturday, June 27, 2020 3:08 PM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: [TowerTalk] How best to cut 1/4 inch ss cable?

Any recommendations?  I was thinking about taping
the place for the cut with electrical tape and then
wedging it in a piece of copper tubing....

thanks, 73, Phil  W5BVB
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk