Towertalk
[Top] [All Lists]

Re: [TowerTalk] Coaxial Stubs target frequencies for CQWW SSB

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Coaxial Stubs target frequencies for CQWW SSB
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Thu, 1 Oct 2020 10:32:37 -0700
List-post: <mailto:towertalk@contesting.com>
I would start by STUDYING http://k9yc.com/Multi-Station.pdf  and
http://k9yc.com/StubPlacement.pdf

In addition, you will need to consider the length added to the stub by the switching circuitry, also the optimum location of each stub along the feedline, which is VERY important.

73, Jim K9YC

I have seen comments over several articles about making different length
sets for CW vs. SSB contests. What target frequencies should I be cutting
each of the stubs to using my RigExpert analyzer for SSB? What would I use
for a second set for CW contests?


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>