Re: [TowerTalk] Phillystran suppliers

[Grant Saviers <grants2@pacbell.net>]

Not much hurts the Kevlar core other than UV, crushing, and very sharp 
bends.
There is "original" Phillystran that can't be terminated with grips as 
the cover does not adhere to the core.  I used 25K# reclaimed "original" 
for my tower using potted terminations, see NCJ 11/2014.
Guy grips IMO are a bad termination for any but the smallest Philly.

You could also get a pull test done on a sample guy. Probably a good 
idea for "a couple of 160ft towers."  Many commercial rigging suppliers 
have the pull test beds to way beyond 6700#.
Grant KZ1W


On 9/10/2021 03:51, Keith Dutson wrote:
>   
> Anyone know if used Phillystran is still good.
> Years ago I bought some tower sections from a ham who took down several Rohn 55G towers.  The fellow 
> handling the sale had a big pile of guy lines used for the towers.  The pile was all 6700 pound 
> Phillystran, just as they were installed, with thimbles and short Rohn EHS guys attached to each 
> end.  I bought the whole pile for a good price.  I am thinking of using them to put up a couple 
> of 160 foot towers.    On Friday, September 10, 2021, 04:59:49 AM CDT, Mpridesti via TowerTalk 
> <towertalk@contesting.com> wrote:
>   
>   While on a contest DXpedition to D4C, I saw that station was using what looked to be philly but was actually material used to hold very long covers used in farming (like supporting cheese cloth over large fields in growing tobacco in CT). Amazingly strong and D4C with all their trade winds, holds towers without issue. Recall it was nearly a 1/2 inch OD.
> Perhaps research in the agricultural areas?
> May have come from Italy.  Was told it was very inexpensive.
>
> Regards,
>
> Mark, K1RX
>
>
> > On Sep 10, 2021, at 5:16 AM, Jon Zaimes via TowerTalk 
> > <towertalk@contesting.com> wrote:
> >
> > Similar material is used in marine industry, but like everything else for a 
> > boat it is likely pricier than DXE.
> > 73/Jon AA1K
> >
> >
> > Sent from the all new AOL app for iOS
> >
> >
> > On Thursday, September 9, 2021, 6:37 PM, Gary Johnson <gwj@wb9jps.com> wrote:
> >
> > Besides DXE, I haven’t found any other suppliers for Phillystran. Texas Towers 
> > doesn’t list it anymore either. Thought it would be nice to shop around before buying 
> > a mile of it. Any hints?
> >
> > Gary NA6O
> > gwj@wb9jps.com
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>    
> _______________________________________________
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk