Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pipe for guy anchor

To: Rick Harrington N0VT <[email protected]>, [email protected]
Subject: Re: [TowerTalk] Pipe for guy anchor
From: "Richard (Rick) Karlquist" <[email protected]>
Date: Tue, 9 Aug 2022 06:05:20 -0700
List-post: <mailto:[email protected]>
If it was me, I would put in a screw in earth anchor
and connect a "guy wire" to the top of the pipe.
Could be at a steep angle.
Without knowing your situation, I can't tell if this
is feasible.  However, this allows you to use just
a 2" water pipe since there is no force bending it
PLUS you can skimp on the concrete since there is
no overturning force on it.

73
Rick N6RK

On 8/9/2022 5:34 AM, Rick Harrington N0VT wrote:
I have a small lot and my tower is 70' of 25G.  Due to some obstacles in the yard that can't be worked around I need to sink some metal pipe in concrete and attach the guys about 6 feet up instead of taking them down to the ground.  I realize this isn't the preferred situation.

What type of pipe should I be looking for?

Thanks, Rick N0VT
_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>