Towertalk
[Top] [All Lists]

Re: [TowerTalk] Peak Voltage at the Tip of Antennas

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Peak Voltage at the Tip of Antennas
From: "Lux, Jim" <jim@luxfamily.com>
Date: Thu, 20 Oct 2022 13:53:30 -0700
List-post: <mailto:towertalk@contesting.com>
On 10/20/22 1:50 PM, Lux, Jim wrote:
On 10/20/22 12:08 PM, Pete Smith N4ZR wrote:
Not blaming Ed, but is this for real?  I wonder what all the 75 and 160M phone guys think of this?

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 10/20/2022 1:43 PM, Edward McCann wrote:
“In the low-frequency band, bandwidth is quite scarce for any top-loaded
antenna type and must be carefully evaluated in order to obtain
good-quality speech transmission. In this band, this kind of antenna is
practically the only choice, due to the antenna’s size. In the low end of the medium-frequency band, it is quite difficult to obtain a high-fidelity
bandwidth.”

Physically short antennas for MW (implied by top load) could be quite narrow band.  "high fidelity" would be 10kHz BW.  that's 1% at 1 MHz and 2% at 500 kHz.

If he's talking real LF (e.g. 100 or 300kHz, getting 10kHz BW with a toploaded system would be challenging).


For comparison, a run of the mill dipole with thin wires is about 5% bandwidth. At 300 meter wavelength (1 MHz) any sort of tower is essentially a "thin wire".

A full size antenna at 100 kHz (lambda = 3km) is a monster.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>