Dan, thank you for the heads up.
73, Maximo
Máximo EA1DDO
www.EA1DDO.es
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Dan
Maguire
Sent: sábado, 1 de abril de 2023 8:01
To: towertalk <towertalk@contesting.com>
Subject: [TowerTalk] EZNEC Pro/2+ and Pro/4+ v. 7.0.2 now available
Roy Lewallen has corrected two v. 7.0.1 bugs:
1) The Far Field table (via the "FF Tab" button) did not include columns for
relative phase. In v. 7.0.1 the Far Field table typically had Deg/V dB/H
dB/Tot dB columns. With v. 7.0.2 it now has Deg/V dB/H dB/Tot dB/V Pha/H Pha
columns.
If you explicitly do *not* want to include phase in the table use Special
Options FFPhase = Off in the .INI file.
2) When using *either* the builtin NEC-4.2 engine (NEC-4D, available only with
Pro/4+) *or* an external NEC-4.2 engine (Pro/2+ or Pro/4+), switching between
Real/High Accuracy and Real/Extended Accuracy ground would not automatically
signal that the engine must be run again to update various calculated data
items. This was only a problem when toggling between those two ground choices.
Switching to any other type of ground (Free Space, Perfect, or Real/MININEC)
*would* signal that an engine rerun is required. Now fixed.
Pro/2+ users can download EZNEC_Pro2+_702_setup.exe here:
https://eznec.com/v7download/pro2+download.php
Pro/4+ users can download EZNEC_Pro4+_702_setup.exe here:
https://eznec.com/pro4+_upgrade.htm
It is not necessary to uninstall v. 7.0.1 beforehand; v. 7.0.2 will overwrite
it.
Dan, AC6LA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|