I had to do the same thing on my Yaesu G-800DXA. See attached instructions
(which are the same for the G-1000DXA).
The pictures are found at the link in the text, but also here directly:
https://www.hamsupply.com/yaesu-illuminator-installation/

73, Ken WC6Y
> On Jul 30, 2024, at 12:29 PM, Jack Brindle via TowerTalk
> <[email protected]> wrote:
>
> Pete;
>
> You might want to consider installing the Yaesu Illuminator LED board from
> Ham Supply: https://www.hamsupply.com/yaesu-illuminator/
>
> I have one, but haven’t installed it yet (a major move got in the way. It is
> still in a box after three years)…
> They have pretty good installation instructions, and for $24 it is worth a
> try.
>
> 73,
> Jack, W6FB
>
>
>> On Jul 30, 2024, at 2:21 PM, Pete Smith N4ZR <[email protected]> wrote:
>>
>> I need to replace the direction scale illumination bulb on my G-1000DXA
>> controller, but have so far failed to figure out how to open the case, and
>> hesitate to force things to get to ths bulb, which I need to do to figure
>> out what replacement to buy. Repeated e-mails to Yaesu have not yielded a
>> response on either question. Can anyone help?
>>
>> --
>> 73, Pete N4ZR
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> [email protected]
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> [email protected]
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|