On 9/25/2025 4:01 PM, Gary Smith wrote:
Just connect the coax to the phasing bars directly or do as suggested by
byMosley which is make a six turn choke near the phasing bars or go without?
My detailed recommendations, based on nearly 20 years of research, are
here. http://k9yc.com/2018Cookbook.pdf
In general, I recommend the matching system or "balun" recommended by
the mfr be used, with a choke based on my designs added between that and
the feedline.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|