Stan wrote:
>>> So in the chart it shows the equivalent diameter as 2.14" and the length as
2.925". I am assuming from what I read that the half length of the clam
shell clamp that extends out from the edge of the boom is 2-5/8" with an
overall length of 7.25" (5.25" + 2") and that the length of 2.925 is
derived by adding .3" for half the electrical length of the boom diameter?
AutoEZ can do the equivalent diameter calculations for Hy-Gain clamps.
Using the 204-BA clamp as an example, here's a screen grab:
https://imgur.com/RSwJIjx
And this image from AutoEZ reference page
https://ac6la.com/aecreate.html might help with the Length vs Width
question:
https://imgur.com/iK73737
Dan, AC6LA
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|