That is the common way to service this rotor. Comealong to lift the load if is
heavy.
Regards,
Mark, K1RX
> On Jan 3, 2026, at 4:05 PM, john simmons <jasimmons@pinewooddata.com> wrote:
>
> I have a 25AG top section with a Tailtwister mounted on a AS25G. The mast is
> 1-1/2" galvanized pipe. Can the rotor be removed sideways by raising the mast
> an inch or so and removing the rotor mounting bolts? It's 20 degrees F here
> and I don't think my tower guy wants to spend much time at 80' changing out
> the rotor for a spare.
>
> 73
> -de "Curly" John NI0K
> QRZ.com<https://www.qrz.com/db/ni0k>
> Hamshack Hotline<https://hamshackhotline.com/> call me: 6100271
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|