WriteLog
[Top] [All Lists]

[WriteLog] Pse help get windows back

To: <writelog@contesting.com>
Subject: [WriteLog] Pse help get windows back
From: w5xd@writelog.com (W. Wright, W5XD)
Date: Tue, 5 Dec 2000 04:41:18 -0000
Marty's suggestion probably won't work in version 10.
In version 10, WL saves the window positions in the .WL file.
You can tell it to NOT recover those positions by holding
down the CTRL key while it opens the file. This applies
whether you use the Browse dialog box, or the most-recently-used
list.

Wayne, W5XD

-----Original Message-----
From: owner-writelog@contesting.com
[mailto:owner-writelog@contesting.com]On Behalf Of Marty Tippin
Sent: Tuesday, December 05, 2000 02:32
To: WA9ALS - John; writelog@contesting.com
Subject: Re: [WriteLog] Pse help get windows back



I should mention that this will most likely reset all windows to a
"default" size and location - and if it doesn't look like it worked
correctly or if things go haywire, delete the writelog.ini that you
modified and rename your copy of writelog.ini back to writelog.ini

You might also look at the [DockScreen-Summary] section and see if the
"ScreenCX" and "ScreenCY" are set to values that match the width and height
of your monitor settings.

-Marty NW0L


At 08:27 PM 12/4/00 -0600, Marty Tippin wrote:

>This is fairly drastic but should fix the problem:
>
>1. Make a copy of C:\windows\writelog.ini
>2. Open C:\WINDOWS\writelog.ini and remove every section that has
>"[DockScreen-Barxx]" at the beginning of it (where xx is a number as in
>"[DockScreen-Bar26]") - by "section" I mean the line that has the square
>brackets around it and all lines below that up to but not including the
>next line that has square brackets around it.  Also remove any lines that
>start "X="   "Y="   "W=" and "H=" in other sections - you'll see those in
>the TUWIN and RTTYRITE sections. That should reset all the window
>positions to the default location.
>
>-Marty NW0L
>  martyt@pobox.com
>
>
>At 08:55 PM 12/4/00 -0500, WA9ALS wrote:
>
>>I operated with 2 monitors Saturday, then went back to 1.  I couldn't
>>find some of the windows, so I thought it had something to do with the
>>"real estate" and have been trying to get back to using one monitor.
>>Even with the second monitor disabled in Windows (and not hooked up), I
>>couldn't find the msising Writelog windows.
>>
>>Tonight I hooked the 2nd monitor back up, thinking I would find the
>>missing windows and get them back on one screen.  Well, there must be
>>something else very wrong, and I can't figure it out.
>>
>>The problem is CONTEST-SPECIFIC!  If I bring up the TARA contest, I
>>cannot view the Check Call, Super Check Partial, Rates, or Beam Headings
>>windows.  **HOWEVER**, if I bring up any other contest or start a new
>>contest, the windows come up as expected!
>>
>>So...  What is contest-specific about the windows, and what could I have
>>done to mess them up?  In a way it doesn't matter since they will be OK
>>for new contests, but it's one of those spooky things you just don't
>>feel good about unless you can figure it out!  THANKS!


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com



--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>