YAY - Something I know for a change! Writelog expects the IC-706 at 48H.
You can change that in the radio's menu. Check the manual to see how. I
use it all the time...
Not sure the history of this - maybe the original 706 was 48H when Wayne did
the development. Anyway, it works great.
---------------------------------
WA9ALS - John
jfleming@shelbynet.net
http://www.qsl.net/wa9als
---------------------------------
----- Original Message -----
From: "Wink" <wink@rpa.net>
To: "Wink" <wink@rpa.net>; <writelog@contesting.com>
Sent: Friday, December 08, 2000 2:53 PM
Subject: [WriteLog] IC-706MkIIG Problem
>
> I've been using Writelog 10.22 with my IC-746 for several weeks
without
> any problems. The 746 is in for repair and I want to use my IC-706MkIIG
for
> this weekend's 10 meter contest. I've set the radio port to 706 in the
port
> setting screen. The radio's address is 58h. The baud rates are the same.
> I'm using a W1GEE LCU-3I interface. The 706 and interface work well with
> Logger but so far I've been unsuccessful communicating with Writelog.
What
> am I doing wrong?
>
> Thanks,
>
> Gary N2UM
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|