[AMPS] PL-172 specs

Jim Zellmer zellmer@raccoon.com
Wed, 5 Aug 1998 17:48:59 -0500




I have a copy of the 1959 penta lab catalog and pulled the following specs
out for a
PL-172 used in AB1 RF amplifier service. at 3000 Volts

DC Plate Voltage    3000 Volts
DC Sceen Supressor Voltage    500 volts
DC Suppressor Grid Voltage    75 volts
DC Control Grid  Voltage            -115 Volts
Zero signal DC Plate Current    220 ma
Zero signal DC Screen Current    9 ma
Maximum signal DC Plate Current    780 ma
Maximum signal DC screen Current    41 ma
Maximum signal Peak RF Grid voltage    110 volts
Maximum signal Power Input                    2340 watts
Maximum Useful Power output                1540 watts

filament 6.0 volts at 7.8amps

The tube is also know by the number 8295.
The closest EIMAC equivalent might be the 4CX1000A.


Other substitutions could require PS changes.

73,

Jim Zellmer,  KA0VSL
>
>
>
>


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm