[AMPS] Screen regulator circuit needed

[John Nelson]

Message text written by Rich Measures

>However, one need not use the same obviously-flaky zeners that GW4FRX used
. <

For the record, the Zeners used to derive the comparison data illustrated
on Ian's web site were nine 20W Philips/Mullard BZY93C39 purchased
specifically for the tests. These were chosen to give a nominal 350V for
comparison with the stabilised supply being developed at the time. It's not
clear why such components should be "obviously flaky", especially since
ISTR that this particular arrangement was the least worst of several Zener
combinations tested around the same time.    

John Nelson
GW4FRX



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm