[AMPS] L4B
Peter Chadwick
Peter_Chadwick@mitel.com
Fri, 16 Oct 1998 16:15:17 +0100
Carl says:
>But Peter, you would not expect much in the way of temperature drift in
>the short term. Any heating from either current flow or mounting location
>would cause a slow and gradual change. Since the operating bias for
>3-500Z's is usually defined over a fairly wide range...70-120ma per tube
I guess it depends on how well you want to define the current..........my
amp is in a BIG cabinet and it gets warm inside. However, if the L4 is
likely to be driven by a modern splatter producer, it probably makes no
difference whatsoever.
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm