[AMPS] follow-up: filament voltage questions

[Steve Jackson]

As a follow-up to my earlier post:

I measure the L7 filament voltage at 5.14 VAC using the aforementioned
Fluke 77 DVM.

An oscilloscope across this same test point shows no power-on 'bang' - so
the transformer is performing well in this manner, no inrush surge to worry
about.

So guys, should I bother with fiddling about 0.14 volt?  This is 2.7% high,
per my calculator...


Steve KZ1X/4

* * *


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm