[AMPS] Clipperton L & Bad tubes

[Roger D. Johnson]

Check the filament voltage with an accurate meter. I repaired one for a
friend
that had almost 7 volts on the filaments. The poor 572B's went bad in a
hurry!
We put a 0.1 ohm resistor in the circuit and it dropped the voltage to
normal.

73, Roger



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm