[AMPS] HV Switching Supply

[Harv Shore]

Whatever you do in your design you must consider both radiated noise and
susceptibility to power line noise.  Also you need over current protection
and smooth start up. Don't think you can get away with a simple "Buck"
regulator.
Harv
K6EXO


-----Original Message-----
From: Larry Molitor <w7iuv@axtek.com>
To: amps@contesting.com <amps@contesting.com>
Date: Monday, February 01, 1999 5:14 PM
Subject: Re: [AMPS] HV Switching Supply


>
>At 21:04 30-01-99 -0500, you wrote:
>
>>I've been working on the specs of a switcher supply that hopefully will
>>become a QEX article and a kit.
>
>>Comments and suggestions PLEASE !
>>
>>73  Carl  KM1H
>
>Go for it, Carl! Since switcher technology has progressed to the point
>where one could actually work with SSB and CW type loads, I'm ready for
>either version you are proposing!
>
>One suggestion: Built-in ramp up so that the supply could be radiply cycled
>on and off. (selfish motive here, I have a need for such a supply!)
>
>Thanks & 73,
>
>Larry _ W7IUV
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm