[Fwd: [AMPS] Edge wound .1-40 uH Variable from SSN - comments-?]

Rich Measures measures@vc.net
Fri, 12 Feb 1999 08:05:15 -0800




>
>
>Date: Thu, 11 Feb 1999 11:21:04 -0800
>From: Phil Clements <philk5pc@tyler.net>
>Subject: Re: [AMPS] Edge wound .1-40 uH Variable from SSN - comments-?
>
>
>K5EE (SK) had a beautiful amp  using a 3cx3000A7 with the
>SSN coil; 160-10 meters. It played VERY well.
>
>GL,
>
>Phil, K5PC
>
€  What are the dimensions of the ribbon in the SSN coil, Phil?

>Carsten Esch wrote:
>
>> Anyone with comments on the above mentioned inductor? How would this
>> thing work in a
>>
>> a. 3CX1500A7 amp
>> b. 3CX3000A7 amp
>>
>> covering 160-10m ? Or should I wound again my own coil?
>>
>> Regards,
>>
>> Carsten, DL6LAU
>>
>> ­ 2-10 kw Power Handling ­
>> ­ Taper Wound Front End ­
>> ­ Edge Wound Coil All Silver Plated ­
>>
>> (IRV)RI-40: It's here at last! The ultimate variable inductor. Isn't
>> your tuner or amplifier project worth the very best? Made exclusively
>> for Surplus Sales of Nebraska.
>>
>> .1-40 uH variable edge wound inductor. Taper wound lower end (higher Q)
>> for better results beyond 20 MHz. Enough inductance for work below 160
>> meters too. All rf surfaces are thick silver plated. Quad 10 amp
>> contact sets on all rotating connections; coil to rotar; rotor to shaft
>> armature; shaft armature to end
>> plate contacts. There are no weak links with our mil-spec design.
>>
>> Perfect for 2-10 kw antenna tuners, tank network for amplifier or
>> anywhere a larger, high Q, variable inductance is required. Be sure to
>> use our Turns Counter (SHW)TCV.
>>
>> 5" wide, 5-1/4" high, 12-1/2" end to end, maximum dimensions. 1/4"
>> shaft. Optional end stop kit for motor drive schemes. Add $ for kit, pn
>> (IRV)RI-40ESK.
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/ampfaq.html
>> Submissions:              amps@contesting.com
>> Administrative requests:  amps-REQUEST@contesting.com
>> Problems:                 owner-amps@contesting.com
>> Search:                   http://www.contesting.com/km9p/search.htm
>
>
>
>



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm