[AMPS] G2DAF

[Rich Measures]

>
>Tom says:
>
>
>>> ?  Power transfer is maximal when the resistance of the load equals the
>>> internal of the generator.  At this point, efficiency is 50%.   However,
>>> in practice amplifiers are c.60% efficient.  
>>
>>You've made the common mistake of looking at "pictures in books" 
>>and not reading all the text explaining the pictures.
>
>There are at least as many very eminent engineers and academics who disagree
>with Tom as there are those who agree. 

€  Can you name two eminent engineers who agree with Mr. Rauch on his 
contention that AC Circuit Analysis does not apply in determining current 
division in a L/R VHF parasite suppressor? .  

> Positions are sufficiently entrenched
>that I don't believe either side will convince the other. Personally, I
>can't swallow 'non dissipative' resistance. 

€  nor do I. 

> But I think that all this thread
>will produce is acrimony and discord.
>
which is the engine of interest in every ''soap opera'' and ''novella'' 
on television in the Amerias.  
>
"Where there's smoke there's fire".  
On AMPS, without Mr. Rauch, there would undoubtedly be little smoke.
-  cheers, Peter.  .


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm