[AMPS] DPDT Relay Needed for the Acom 2000a

[Phil Clements]

>I'm going to use one of the 12v control signals available to turn the
>amplifier on and off.  In order to do this I need a DPDT relay with a
>low current 12v coil with contacts that can handle 220v' at 20amps.
>I'll put the relay in the 220v line to the amplifier.
>
>Anyone know where I can get one of these?
>
Hi Richard,
I buy all my big relays from W.W. Grainger.
They have stores all over Texas and elsewhere.
I have lots of good relays for your application here, but they
have 24 volt dc coils/20 amp contacts.

GL!
Phil, K5PC



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm