[AMPS] TL-922 Filament Transformer Protection

[Jon Ogden]

>�  hotswitching causes a spark. 
>
>>I always thought anode current (other than bias current) was produce by a 
>>driving signal.  
>
>�  The spark is connected to a wire that connects to the input of the 
>tube. 

Is the amplitude of a spark that is generated by hotswitching a 100W 
signal on the input relay really large enough to drive the tube and 
thereby generate a change in anode current on the output?

73,

Jon
KE9NA


-------------------------------------
Jon Ogden
KE9NA

http://www.qsl.net/ke9na    <--- CHECK IT OUT!  It's been updated!!!!!


"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm