[AMPS] SB220 Xformer labodomy-cont'd

[Rich Measures]

>
>Rich,
>
>Cured polyester resin.
>
€  surprising.   What temp for the epoxy? 
-     I wound a transformer 21 years ago which I potted in polyester 
laminating resin.  So far, no problems.  

-  thanks, Len
>
>
>
>At 12:07 PM 3/1/99 -0800, Rich Measures wrote:
>>>
>>>Hello again:
>>>
>>>I've done a little homework and found that the polyester resin from Evercoat
>>>and carried at Home Depot will start to degrade at 150 degrees F (66 C).
>>
>>€  cured polyester resin or uncured?
>>thanks, Len
>>
>>
>>Rich...
>>
>>R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  
>>
>>
>>
>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm