[AMPS] Fw: SWAN MARK II AMP

[Michael . Symonette]

----- Original Message -----
From: Michael . Symonette <ke4krs@netzero.net>
To: <amps@contesting.com>
Sent: Saturday, May 08, 1999 10:18 AM
Subject: Fw: SWAN MARK II AMP


>
> ----- Original Message -----
> From: Michael . Symonette <ke4krs@netzero.net>
> To: <amps@contesting.com>
> Sent: Friday, May 07, 1999 9:51 PM
> Subject: SWAN MARK II AMP
>
>
> > Can anyone help identify a diode in the Swan Mark II Amp Pwr Supply
> circuit
> > ?  There is a diode connected across the 40 MF / 350 volt capacitor at
the
> > base of the mercury relay. The cathode is connected to the positive side
> of
> > the 40 mf /350 volt electrolytic and the anode is connected to the brn
> wire
> > on the power connector at pin 7, which comes from the amp on/off switch.
> >
> > This diode is not located on the schematic that I can determine.  Can
> anyone
> > help ?????
> >
> >
> > Mike KK4MS
> >
>

________________________________________________________
NetZero - We believe in a FREE Internet.  Shouldn't you?
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm