[AMPS] (Fwd) Returned mail: User unknown

[gdaught6@leland.Stanford.EDU]

This bounced, so I'll post it to the reflector,

 Hi Larry,

> I have looked all thru the internet for info on this tube ie. max plate
> voltage, current, etc.etc and can't find any info and have lost my tube
> reference manual.  would someone pse e-mail me the pertinant info.

I happen to be sitting just under my old Eimac book, so here's what 
it says:

Filament = 7.5 volts at 21 amperes
Grid/Screen mu = 7
Grid/Plate cap = 0.24 pf
Input cap = 27.2 pf
Output cap = 7.6 pf
Transconductance = 10,000 micromhos
Max freq = 110 MHz

AF power anp class AB
DC Plate volts = 6000
DC Screen volts = 1000
Max sig DC plate Current = 700ma
Plate Dissipation = 1000 watts
Screen Diss. = 75 watts

Typical Operation

DC plate volts = 5000
DC screen bolts = 1000
DC grid volts = -130
Zero signal plate current = 133 ma
single tone plate current = 480 ma
"                "  screen current = 35 ma
"               "  grid current = 0
"               "  Plate power input (DC) = 2400 watts
"              "   Plate power output (RF) = 1500 watts
two tone plate current = 340 ma
"            "  screen current = 13 ma

I hope this helps you.

73,


George T. Daughters, K6GT

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm