[AMPS] TS940S CONNECTION TO HEATHKIT SB200 LINEAR

measures measures@vcnet.com
Wed, 20 Oct 1999 10:29:26 -0700


>Have a SB200 linear and attemping to hook it up to a Kenwood TS940S. 
>Kenwood (and the Manual) states that Pin 4 on the remote connector is 
>Relay, Pin 2 is Ground, and Pin 6 is ALC.  This is a 7 PIN DIN connector.  
>I can not get closure of the relay between pins 4 and 2. Is there a 
>special connector that I have to get from Kenwood? Is there some switch 
>setting on the TS940 that activates the relay....

€  As I recall, it's a white jumper wire.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm