[AMPS] IC-756PRO/HF-2500 Problem

measures 2@vc.net
Fri, 11 Aug 2000 12:05:32 -0700


>
>I would be nearly certain the problem
>is a "sticking" T/R relay.  I had exactly the
>same symptom some months back;  was
>cured by replacing the relay.  Was very
>annoying at the time for sure!  The relay over
>on the amp was the one hanging up.
>
When a DC relay hangs up, the problem could be residual magnetism in the 
armature.  This can usually be cured by reversing the wires to the coil.  

later, Jim

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com