[AMPS] Diode stacks

[W6NQ]

Diode stack #24050 is rated at 32KV PIV with center 
tap, allowing two units to be used in bridge configuration.  
They are rated at a conservative 1.2A CCS with a 60A 
surge current.  Diodes are individually rated at 2.5A.
you will find the specs at:  http://www.rfparts.com
Regards,  Merit  W6NQ

----- Original Message ----- 
From: Radio WC6W <wc6w@juno.com>
To: <amps@contesting.com>
Sent: Sunday, January 30, 2000 9:11 AM
Subject: Re: [AMPS] Diode stacks 


> 
> >I bought a couple of diode stacks at TRW and was told they were 15kv
> @1.5A,
> >they have a part number on the side that reads P/N 24050 and I  T H I N
> K
> >they might be for Henry amplifiers.  Can anyone verify this for me and
> tell
> >me what the specs actually are before I lite them up?
> 
> >   Thanks.
> 
> >   Mike - W6FFC
> 
> Hi Mike,
>    Those sound like RF Parts... parts.
> 
>    Take a look at:  http://www.cts.com/sd/marnold/hvrect.html
> 
> 73,
>    Marv  WC6W
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> *
> 
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> 
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 
> 


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm