[AMPS] Wire size

[Jeffrey A. Madore]

If you're only running 6 - 8 feet (assume 12 - 16 feet total) why not use 4/0
cu to minimize E drop. I would use welding cable and solder the terminations
with a tourch. If using a bolted lug,  wrap the stripped end with copper
flashing

> I'm going to power a solid state amp with about 120 amps of 13vdc.  I'll
> need
> about 6-8 feet of wire to get from the PS to the amp.  What wire size
> should I
> use?
>
> 73,
> Vic, K2VCO
> Fresno CA
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm