[AMPS] 8877 amp failure

[measures]

>
>> The original problem was that the HV took a short cut thru the side of a
>> Millen HV connector to the chassis.  My B+ surge resistor did it's job but
>> lost it's life in the process.  Apparently, this is when the zener went 
also.
>
>There are two types of Millen HV connector users when dealing with < 2500v

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm