R: [AMPS] QRO TORROID (WAS MORE USEFUL SUPPLY.
Maurizio Panicara
i4jmy@iol.it
Mon, 24 Jan 2000 16:09:19 +0100
----- Original Message -----
From: Phil Clements <philk5pc@tyler.net>
To: Jim Zellmer <zellmer@raccoon.com>; <amps@contesting.com>
Sent: Monday, January 24, 2000 4:13 AM
Subject: Re: [AMPS] QRO TORROID (WAS MORE USEFUL SUPPLY.
>
> That is a 4:1 un un transformer to step 200 ohms down to 50 ohms.
> The harmonic attenuation is the same as a Pi network, but this method
> is much cheaper to produce than either a Pi or a Pi L tank circuit.
>
>
> (((73)))
> Phil, K5PC
May be on a matched and purely resistive load.
Iron core baluns, unless very largely oversized, do not perform well in case
of mismatches.
73,
Mauri I4JMY
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm