[AMPS] Output power question

N2TK n2tk@earthlink.net
Tue, 25 Jan 2000 16:16:25 -0500



After reading the info on "Input power question", it got me thinking about
my output power problem. When I first installed my Acom 2000A on the desktop
it performed very well including full output on the top end of 40m even
though the swr was >2.5. When I moved the amp to the basement so that only
the RCU is in the shack I still had the same output on all bands except the
high end of 40m. I could only get 600 w out. What changed was the length of
coax between the amp and the coax line to the remote coax switch. I had used
the same coax between the amp and the transceiver. I added 10' of coax on
the output of the amp and I am getting more power out now on the high end of
40m.
One of the others who bought the Acom discovered the same situation and
solved it the same way.

Question - is there a way to predict this problem and figure out if there is
a "magic" length of coax that will take care of this problem or some kind of
stub, filter or anything else to solve it? Or is it just trial and error
with high swr?

By the way, the Acom works great!

Tnx
Tony


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm