[AMPS] Re: Poor science

[Phil Clements]

> >My inclination is now turning toward a short from anode to ground through
> >the grid.
> >An ammeter in the cathode lead would remain at zero during an event like
> >this.
> >A tell-tale pile of grid pieces in the bottom of the tube envelope lead me
> >down this path.  A purely uneducated guess eight years after the fact from
> 2000
> >miles away!
> >
> This scenario would have required broken anode cooler welds - which
> allowed the anode cooler to tip sideways and touch the grid.  Terry did
> not report such an occurrence.
> If Terry still has the fil./grid shorted tubes, I can disassemble them,
> photograph what I find, and post it on my Web site.
>
> cheers, Phil
My feeling is that the failure was NOT mechanical in nature.
I have an 8877 here that trips 30 amp breakers while drawing "0" cathode current.

(((73)))
Phil, K5PC




--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm